High Precision ER Milling Chuck Set
Ang ER milling chuck set ay isang high-precision na collet chuck set, ang mga collet ay spring-loaded, kaya nakakahawak sila ng iba't ibang laki.Ang chuck set na ito ay perpekto para sa paggamit sa mga mill at iba pang precision machine.
| Order No. | Sukat ng butas | PCS / SET | |
| pulgada | mm | ||
| ER16-8in(mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6in(mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10in(mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6in(mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12in(mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8in(mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15in(mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
Thread ng Draw Bar
| Taper ng collet chuck | Thread ng draw bar | |
| R8 | 7/16＂-20UNF | |
| 7:24 30 | M12×1.75 | 1/2＂-13UNC |
| 7:24 40 | M16×2.0 | 5/8＂-11UNC |
| 7:24 50 | M24×3.0 | 1＂-8UNC |
| MS2 | M10×1.5 | 3/8＂-16UNC |
| MS3 | M12×1.75 | 1/2＂-13UNC |
| MS4 | M16×2.0 | 5/8＂-11UNC |
| MS5 | M20×2.5 | 3/4＂-10UNC |
| MS6 | M24×3.0 | 1 ＂ -8UNC |
Mangyaring abisuhan ang thread ng collet chuck draw bar at ang detalye ng mga collet (metric o pulgada)
Mangyaring ipaalam ang haba ng straight shank at dia.
Natutuwa kaming magbigay ng mga collet at chuck na may iba't ibang shank at dami ayon sa iyong pangangailangan.
